TC100 Ticket Converter Board
Quick Install Guide
Overview
The TC100 Ticket Converter Board converts ENABLE LOW ticket signals commonly found on many import and redemption games into a traditional ENABLE HIGH output compatible with standard ticket mechs and card reader systems.
Before Installation
- Power OFF the game before wiring
- Verify all wiring connections
- Mount securely away from moving parts
- Avoid high-voltage areas
Common Uses
- Import arcade games
- Ticket mech conversions
- Card reader integrations
- Redemption game upgrades
Installation Steps
1. Connect Game Signal Input
Connect the game’s original ticket enable signal to the ENABLE IN side of the TC100.
2. Connect Output to Ticket Mech / Reader
Connect the TC100 output harness to the ticket mech or card reader ticket input. The TC100 converts the signal into a compatible ENABLE HIGH output.
3. Apply Power
Power on the arcade game. The onboard LED indicator will illuminate when the enable output is active.
LED Indicator
| LED Status | Meaning |
|---|---|
| OFF | No enable signal detected |
| ON | Enable output active |
Installation Notes
- Ensure all grounds are properly connected
- Do not short outputs directly to voltage
- Verify polarity before powering the system
- Route signal wiring away from high-noise AC lines when possible
MaxPlay Integrated Payment Solutions, LLC
Whitney, Texas | support@maxplayips.com | www.maxplayips.com